在线客服
  • 产品名称: 300/500V橡皮绝缘固定敷设电线

 300/500V橡皮绝缘固定敷设电线(JV 1601-93)

300/500V rubber insulated fixed installed wire (JB 1601-93)

   一、用途Use

    本产品适用于交流50Hz,额定电压0.6/1KV的线路中,供输配电能之用。

    The cable is used as power distribution and transim

       

   二、型号、名称及使用场所(见表1)Model,name and using place:(see bable 1)

 

 型 号Model 名 称 Name   敷设使用场所 Instalation and using place

BXF

BLXF

铜芯橡皮绝缘氯丁或其它相当的合成胶混合物护套电线

PVC insulated PVC sheathed power cable

铝芯橡皮绝缘氯丁或其它相当的合成胶混合物护套电线

 

适用于户内明敷和户外特别寒冷地区

for laying indoors,inducts and kin tunels,but unable to bear pulling force and pressure.

 BXF

BLXF

铜芯橡皮绝缘氯丁或其它相当的合成胶混合物护套电线

Copper core rubber insulation chioroprene rubber mixture sheath power line

铝芯橡皮绝缘氯丁或其它相当的合成胶混合物护套电线

 Ai core rubber insulation chioroprene rubber mixture sheath power line

适用于户内穿管和户外特别寒冷地区。

for laying indoors,in tunels and direct in ground,able to bear pulling force and pressure.

BX

BLX

 铜芯橡皮绝缘棉纱或其它相当纤维编织电线

Copper core rubber insulation cotton yam of other same fibre-weaving power line

铝芯橡皮绝缘棉纱或其它相当纤维编织电线

Aluminium core rubber insulation cotton yarn of other fibre-weaving power line

固定使用,可明敷、暗敷

for laying down wells and under water,able to bear certain pulling force.

 BXR

 铜芯橡皮绝缘棉纱或其它相当纤维编织软电线

Copper core rubber insulation cotton yam of other same fibre-weaving flexible power line

 室内安装,要求较柔软时用

for laying down wells and under watedr,able to bear certain pulling force.

 

   三、规格尺寸及技术参数:(见表二)Speciftion,size and technological data (see table 2)
   (1)绝缘线芯应经受GB/T3048.9或GB/TT3048.13规定的火花试验,双层一次挤出的电线,只需经受一次火花试验。

   (2)护套

   (a)BXF BLXF型电线的护套应为GB7594.5规定的XH-01A型65℃一般不延燃橡皮护套。

   (b)BXY、SLXY型电线的护套应是低密度黑色聚乙烯。

   (c)护套应紧密挤包在绝缘上,护套表面应平整、色泽均匀。

   (1)Insulation core should bear the sparking test or GB/T3048.9 or GB/T3048.13.Sparking test made only once.

   (2)Sheath

   (a)BXF\BLXF model wire should be the same as stipulated to model XH-01A.Generally,it is not inflammable at the temperatuer if 65℃.

   (b)The sheath of BXY,BLXY model power line shomd be of low density or black polythene.

   (c)The shenth shonld be closely tighened on the insulation.The sureace of the sheath be smooth and  its colour should be well distributed.

   (3)成品电线能经受表3规定的浸水电压试验

   (3)The finished product wire should experience soaked voltage testing as stipulated in table 3.

 

 试验条件Testing terms 单位 Unit 

 性能指标数 Property ominal value

 样本长度 The leng of sample

m

≥10

浸水时间 Soaking time

H

 ≥1

水温 Water temperature

 ℃

20±5

 试验电压值 Testing voltage value

 V

2000

 施加电压时间 Exert voltage time

min

 ≥5

备注:结构、参数及其它数据需要可咨询公司

开元电缆有限公司 Copyright© 2016 www.kydl.cn    All rights reserved     浙ICP备16024470号-1      Powered by www.300.cn