产品中心 产品中心
您所在的当前位置:
首页
>
>
>
JBQ型橡皮绝缘丁腈护套引接线
1/1
浏览量:
1000

JBQ型橡皮绝缘丁腈护套引接线

零售价
0.0
市场价
0.0
浏览量:
1000
数量
-
+
库存:
0
1
产品描述
参数

JBQ型橡皮绝缘丁腈护套引接线(JB 1171-76)

JBQ leading type wire of rubber insulation butyronitrile sheathed (JB 1171-76)

 

 一、用途Usage

该型号产品为交流额定电压1140V及以下的B级绝缘电机、电器绕组连接并引出机壳或绕组与电机壳体上的接线柱连接用电线。

This product is suitable for connecting class B insulation motor for AC rated voltage 1,140V and below and electric appliance windings,and leading the wire for connecting machine enclosure or windings with binding post of motor case.

 
二、型号及名称 Type and name

JBQ橡皮绝缘丁腈护套引接线 JBQ rubber insulated butyronitrile sheathed leading wire

1.镀锡铜导体 Tinned copper conductor

2.隔离层(如果有的话)Isolation layer(if any)

3.橡皮绝缘层 Rubber insulated layer

4.丁腈橡皮护套层 Butyronitrile rubber sheathed layer(注:本产品可根据用户需要制成黑、白、绿和红等多种颜色,色泽鲜艳、持久)(Note:the product can be designed into kinds of colors such as black,white,green,red and so on according to user requirements,its color is very vivid and durable)

 

三、产品结构及参考数据 (见表)Structure size and technological data (see table)JBQ型500V Model of JBQ 500V

 

标称截面

Nominal section(mm2)

导电线芯结构

Conductive core(mm)

绝缘标称厚度

Nominal insulation thickness(mm)

护套标称厚度

Nominal sheath thickness(mm)

电缆最大外径

Outer sheath diameter (mm)

电缆参考重量

Reference weight(kg/km)

20℃导体直流电阻≤(Ω/km) 20℃ conductor resistane≤(Ω/km)

单线根数

Core nodia

单线直径

Diameter(mm)

0.5 28 0.15 0.6 0.8 4.3 20 38.5
0.75 42 0.15 0.6 0.8 4.5 24 25.7
1.0 32 0.20 0.6 0.8 4.7 28 18.9
1.5 48 0.20 0.6 0.8 5.0 35 12.6
2.5 19 0.41 0.8 1.0 6.2 57 7.59
4 19 0.52 0.8 1.0 6.8 76 4.54
6 19 0.64 0.8 1.0 7.5 100 3.00
10 49 0.52 1.0 1.2 10.0 178 1.78
16 49 0.64 1.0 1.2 11.2 243 1.18
25 98 0.58 1.0 1.4 13.7 372 0.716
35 133 0.58 1.0 1.4 14.9 471 0.528
50 133 0.68 1.2 1.6 17.1 647 0384
70 189 0.68 1.2 1.6 19.6 876 0.270
95 259 0.68 1.4 1.6 21.9 1160 0.197
120 259 0.76 1.6 1.8 24.6 1451 0.158
150 320 0.76 1.8 2.2 29 1911 0.132
185 395 0.76 1.8 2.2 32 2268 0.108
240 513 0.76 2.2 3 35 3010 0.0817
300 641 0.76 2.4 3.5 38 3770 0.0654


四、产品技术要求 Tecgnical requirements

1.导体采用镀锡铜丝,其结构符合表1、2的规定,性能符合JB947-76《橡皮和塑料绝缘电线电缆用铜导电线芯》中的要求。

2.绝缘橡皮性能符合JB664-77 《电线电缆用橡皮》标准规定。绝缘厚度符合表1、2,允许偏差-10%,其薄处的厚度不小于标称值的90%-0.1mm。

3.护套橡皮性能符合JB664-77 《电线电缆用橡皮》规定,护套厚度符合表1、2,允许偏差-20%,其薄处的厚度不小于标称值的80%。

4.成品电线须经标准规定的交流50Hz耐电压试验。

5.成品电线导电线芯直流电阻在温度20℃时应符合表1、2规定。

6.电线应能经受浸漆试验,电线经130±5℃,5小时恒温后,浸入温度为50±5℃的10.2漆中30分钟,取出滴干,再经130±5℃,48小时恒温后,将电线卷绕在规定直径的圆棒上,电线护套层应无开裂,脆裂和发粘等现象。

1、The conductor adopts tinned copper wire,its structure conforms to table 1 and 2,the performance is in compliance with Conductor for Rubber and Plastic insulated Wire&Cable.

 2、The insulated rubber performance conforms to JB664-77 Rubber for Wire&Cable. The insulation thickness complies with table 1 and 2,the allowable error is-10%,the thinnest is not less 90%-0.1mm of nominal value.

3、Sheath and rubber performance conforms to JB664-77 Rubber for Wire&Cable. the sheath thickness conforms to table 1 and 2,the allowable error is-20%,the thinnest is not less80% of nominal value.

4、The finished wire must withstand AC 50HZ withstand voltage test stipulated in standards OYLSL0118-2003.

5、DC resistance of finished wire core at 20℃ shall conform to table 1 and 2.

6、The wire shall withstand dipping paint test,the wire shall subject to 130±5℃,after constant temperature for five hours,it is diped into 1032# paint of 50±5℃ for 30min,and taken out to dry,then it subjects to 130±5℃ again,after constanr temperature for 48hours, the wire is rolled around the round bar of specified diameter,the sheathed layer of wire shall have no crack,brittle rupture and stickness.

 

扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

相关产品

1/1.5/2.5平方
1/1.5/2.5平方
了解更多+
1/1.5/2.5平方
2.5-400(平方)
2.5-400(平方)
了解更多+
2.5-400(平方)
2-61芯
2-61芯
了解更多+
2-61芯
2-61芯
2-61芯
了解更多+
2-61芯
2-61芯
2-61芯
了解更多+
2-61芯
2-61芯
2-61芯
了解更多+
2-61芯
2芯-4芯
2芯-4芯
了解更多+
2芯-4芯
3芯
3芯
了解更多+
3芯
JKLYJ架空铝电缆
JKLYJ架空铝电缆
了解更多+
JKLYJ架空铝电缆
开元电缆有限公司

地址:浙江省台州市椒江区开发大道东段2077号

电话:

0576-88697000

邮箱:

kydl0576@163.com

传真:

0576-88133300

开元电缆有限公司 Copyright© 2020 www.kydl.cn    All rights reserved     浙ICP备16024470号-1
网站建设:中企动力  台州